All states · OR
What every buyer, builder, and realtor should screen for before closing on a Oregon parcel — flood zones, soils, wetlands, slope, and the regulatory specifics that catch out-of-state buyers.
Get a federal-data screening report on any Oregon address: SitePrior — $29 →
Cascadia subduction zone seismic and tsunami risk, atmospheric-river flooding, very heavy clay soils west of the Cascades, and high snow load in mountains.
Atmospheric-river driven winter rainfall on the coast; wildfire/post-fire debris flow risk; seismic hazards underlie all foundation design. PNW has heavy moss-loaded drainage and expansive volcanic clays.
NOAA Atlas 14: Volume 1 (Semiarid Southwest) for CA/NV; no Atlas 14 for OR/WA — use NOAA HMR-57. Site-specific design rainfall (2-, 10-, 25-, 100-year, 5-min through 60-day durations) is included in every full SitePrior report for Oregon parcels.
CA: alluvial fans, expansive Aiken clays, liquefaction-prone Holocene sediments. OR/WA: deep volcanic ash and lahar deposits, with heavy clay residuum in the Coast Range.
USDA SSURGO mapping is available for almost every Oregon parcel and is the basis for the soil section in your SitePrior report — including hydrologic soil group (A–D), drainage class, depth to water table, and septic suitability where USDA has rated it.
None of these are deal-breakers on their own, but each one can add tens to hundreds of thousands of dollars to a build — or kill a permit application — if it isn't identified before closing. A SitePrior report flags which of these apply to your specific parcel from federal data sources; a state-licensed engineer in Oregon designs around them.
FEMA's effective NFHL panels cover essentially all of Oregon, with flood-zone designations (X, A, AE, AO, V, VE) tied to specific FIRM panels. Properties in X (unshaded) are outside the 500-year floodplain and don't trigger federal flood-insurance requirements. A and AE zones are inside the 100-year floodplain and require flood insurance with a federally backed mortgage; AE includes a Base Flood Elevation that the finished floor must meet. V and VE are coastal high-hazard zones (wave action expected) requiring elevated construction.
SitePrior's report pulls the effective NFHL panel for your address and reports the zone and BFE. The interpretation paragraph explains what it means for insurance, lender requirements, and finished-floor design — written for a buyer, not for a permit reviewer.
Permit-grade engineering work in Oregon requires a stamped report from a state-licensed engineer. The state also has its own rules on dam safety, wetland setbacks, stormwater management, and (in many cases) shoreline or steep-slope overlays beyond what FEMA and the USACE require. SitePrior tells you when those overlays might apply to your parcel; a state-licensed engineer in Oregon confirms and designs to them.
SitePrior reports are screening documents, not engineering opinions of record. For permits, stamped designs, formal flood-zone amendments (LOMAs), or any work that has to be sealed by a licensed engineer in Oregon, you need someone holding an active state license. The fastest verifiable directories are run by the licensing board itself and the national engineering societies — not by lead-gen aggregators.
Verify any engineer's active license and find the official board roster:
NCEES board directory →NSPE state societies often run a "find an engineer" tool by discipline and county:
NSPE state societies →If your parcel has a dam, levee, or impoundment, contact the state dam-safety office through ASDSO:
ASDSO state directory →Section 404 wetland jurisdiction questions are handled by the U.S. Army Corps district covering your county:
USACE district map →We don't take referral fees from any of the directories above — these are the authoritative federal and professional-society sources. SitePrior is not affiliated with NCEES, NSPE, ASDSO, or USACE.
Federal data, plain-English interpretation, $29. Drops in your inbox in under 90 seconds.