All states · ND
What every buyer, builder, and realtor should screen for before closing on a North Dakota parcel — flood zones, soils, wetlands, slope, and the regulatory specifics that catch out-of-state buyers.
Get a federal-data screening report on any North Dakota address: SitePrior — $29 →
Red River Valley flooding (extreme spring snowmelt), expansive Pierre Shale, and very deep frost depth requiring 72-in foundation design.
Semi-arid west, subhumid east; high diurnal temperature swings; dryland-vs-irrigation distinctions matter for property assessments. Tornado alley across the central plains.
NOAA Atlas 14: Volume 8 (Midwestern States). Site-specific design rainfall (2-, 10-, 25-, 100-year, 5-min through 60-day durations) is included in every full SitePrior report for North Dakota parcels.
Prairie loams transitioning west to expansive clays and gypsiferous shales. Caliche layers limit septic suitability in parts.
USDA SSURGO mapping is available for almost every North Dakota parcel and is the basis for the soil section in your SitePrior report — including hydrologic soil group (A–D), drainage class, depth to water table, and septic suitability where USDA has rated it.
None of these are deal-breakers on their own, but each one can add tens to hundreds of thousands of dollars to a build — or kill a permit application — if it isn't identified before closing. A SitePrior report flags which of these apply to your specific parcel from federal data sources; a state-licensed engineer in North Dakota designs around them.
FEMA's effective NFHL panels cover essentially all of North Dakota, with flood-zone designations (X, A, AE, AO, V, VE) tied to specific FIRM panels. Properties in X (unshaded) are outside the 500-year floodplain and don't trigger federal flood-insurance requirements. A and AE zones are inside the 100-year floodplain and require flood insurance with a federally backed mortgage; AE includes a Base Flood Elevation that the finished floor must meet. V and VE are coastal high-hazard zones (wave action expected) requiring elevated construction.
SitePrior's report pulls the effective NFHL panel for your address and reports the zone and BFE. The interpretation paragraph explains what it means for insurance, lender requirements, and finished-floor design — written for a buyer, not for a permit reviewer.
Permit-grade engineering work in North Dakota requires a stamped report from a state-licensed engineer. The state also has its own rules on dam safety, wetland setbacks, stormwater management, and (in many cases) shoreline or steep-slope overlays beyond what FEMA and the USACE require. SitePrior tells you when those overlays might apply to your parcel; a state-licensed engineer in North Dakota confirms and designs to them.
SitePrior reports are screening documents, not engineering opinions of record. For permits, stamped designs, formal flood-zone amendments (LOMAs), or any work that has to be sealed by a licensed engineer in North Dakota, you need someone holding an active state license. The fastest verifiable directories are run by the licensing board itself and the national engineering societies — not by lead-gen aggregators.
Verify any engineer's active license and find the official board roster:
NCEES board directory →NSPE state societies often run a "find an engineer" tool by discipline and county:
NSPE state societies →If your parcel has a dam, levee, or impoundment, contact the state dam-safety office through ASDSO:
ASDSO state directory →Section 404 wetland jurisdiction questions are handled by the U.S. Army Corps district covering your county:
USACE district map →We don't take referral fees from any of the directories above — these are the authoritative federal and professional-society sources. SitePrior is not affiliated with NCEES, NSPE, ASDSO, or USACE.
Federal data, plain-English interpretation, $29. Drops in your inbox in under 90 seconds.